I believe anything operable needs to be within 26 lower and 66 upper.
Peter T. Parrish, Ph.D., President California Solar Engineering, Inc. 820 Cynthia Ave., Los Angeles, CA 90065 CA Lic. 854779, NABCEP Cert. 031806-26 peter.parr...@calsolareng.com Ph 323-258-8883, Mobile 323-839-6108, Fax 323-258-8885 ________________________________________ From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of bob ellison Sent: Friday, November 26, 2010 4:11 PM To: 'RE-wrenches' Subject: [RE-wrenches] Code switch heights I am looking at installing 4 inverters in a system, 1 on an e panel and 2 SW 4048s and also a SW plus. So its an interesting mix, 3 are just to cut the generator run time for the diesel generator. I am trying to find the allowable range for switch heights for all the gear. Seems the upper limit is about 6 but I am unsure on the lower limit. Any ideas? Thanks, Bob Ellison ________________________________________ No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1170 / Virus Database: 426/3281 - Release Date: 11/26/10 _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
