Keith,
This is easy to test. Simple take an irradiance sensor, turn it upside-down and test the irradiance on the bottom surface of any PV array. It will vary greatly based on exposure to reflected light and so on, but it will rarely be above 100 W/m^2. 10% improvement is an absolute maximum for any bifacial technology, and that is on the high side. Any claims above 10% are ignoring the physics of sunlight, reflectance of typical materials, and PV. Nothing wrong with bi-facials. They are beautiful to look at. I would buy them based on aesthetics, not on performance. Bill. From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Keith Cronin Sent: Tuesday, November 01, 2011 1:04 PM To: RE-Wrenches Subject: [RE-wrenches] Bifacial modules Hi Was wondering if any of you have installed bifacial modules and know what the % of light that comes through to a surface below the modules? Looking for a canopy type of installation/ application and wondered if you have any #'s? Thank you~ Aloha, Keith
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
