I believe the Outback configuration will spin the meter backwards when
utility power is used to charge the batteries. I checked with former
co-workers in a utility meter department. A meter with a detent would be
the simplest way to make the meter unidirectional, but those meters are
supposedly long gone. A meter programmed to be unidirectional would
achieve what the installer wants.
Chris
On 12/7/2011 12:59 AM, wire...@gmail.com wrote:
David,
Here is a link to what you might be looking for:
http://www.outbackpower.com/pdf/tech_notes/120_vac_single_inverter.pdf
Larry Liesner
Wirewiz
31 Lincoln St
Westport, CT 06880
203-644-2404 <tel:203-644-2404>
wire...@gmail.com <mailto:wire...@gmail.com>
www.wire-wiz.com <http://www.wire-wiz.com>
NABCEP Certified PV Installer (# 032611-184)
On Tue, Dec 6, 2011 at 5:08 PM, Dave Palumbo
<d...@independentpowerllc.com <mailto:d...@independentpowerllc.com>>
wrote:
We are installing a grid interactive, with battery back-up,
OutBack Radian GS8048 with 5kW of PV. Vermont has a “Solar Adder”
premium that varies from utility to utility but in this case adds
6 cents per kWh over and above net-metering (basically to come up
to a par value of 20 cents/kWh for PV production).
We need to install a gross PV production meter between the main
(utility) load center panel and the Radian inverter. We need a
meter that is not multidirectional, as we only want to count the
kWh’s that are pushed out into the grid (and not subtract what the
Radian uses from utility power to satisfy the protected loads
center when the sunlight doesn’t handle that).
Hialeah Meter offered a GE KV2CE meter that can be programmed to
do what we need for $ 260 plus $25 programming fee.
The utility will have an option, but I’m wondering what other
options others have used for this situation.
David Palumbo
Independent Power LLC
462 Solar Way Drive
Hyde Park, VT 05655
*/www.independentpowerllc.com <http://www.independentpowerllc.com> /*
NABCEP Certified PV Installer
Vermont Solar Partner
23 Years Experience, (802) 888-7194 <tel:%28802%29%20888-7194>
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
<mailto:RE-wrenches@lists.re-wrenches.org>
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
<http://www.re-wrenches.org/etiquette.htm>
Check out participant bios:
www.members.re-wrenches.org <http://www.members.re-wrenches.org>
--
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options& settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules& etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
--
Christopher Warfel, P.E.
ENTECH Engineering, Inc.
Energy Utilization Experts
(401)466-8978
The information contained within this communication shall
be considered confidential and shall not be retransmitted
without knowledge of the sender. Please contact us if
this email reached you in error. Thank you.
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org