Colleagues:
I put some pictures on our web site at the bottom
of:
http://millersolar.com/MillerSolar/practices/Technical_Procedures/PV_wiring/_PV_wiring.html
Let me know if you need anymore information or assistance.
William Miller
At 10:53 AM 3/2/2012, you wrote:
William, I would be interested in seeing a photo of the new technique if
you could share it as well
Kind regards
Tom Duffy
Systems Design Engineer
t...@thesolar.biz
USA Toll Free 888-503-6772 Bocas del Toro, Panama 6126-1253
Although no trees were killed in the sending of this message, a large
number of electrons were terribly inconvenienced.
Confidentiality Notice: This message including any attachments is for
the sole use of the intended recipient and may contain confidential and
privileged information. Any unauthorized review, use, disclosure or
distribution is prohibited. If you are not the intended recipient, please
contact the sender and delete any copies of this message.
-----Original Message-----
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Carl Adams
Sent: Friday, March 02, 2012 1:13 PM
To: RE-wrenches
Subject: Re: [RE-wrenches] MC4 Box connectors
Dana, Jay, William,
Thanks for your responses.
AEE did not carry the box/bulhead MC4 only the standard cable connector.
PV-Cable suggested by Jay had the connectors at $2.97 each, and can
provide these in small quantities
William, I would be interested in seeing a photo of the new technique if
you could share it.
With Regards
Carl Adams
SunRock Solar
On Fri, Mar 2, 2012 at 10:41 AM, jay peltz <j...@asis.com> wrote:
> Hi William,
>
> Was this cheaper than getting bulkhead fittings?
> Very cool work around.
>
> Jay
>
> peltz power
> On Mar 2, 2012, at 7:19 AM, William Miller wrote:
>
>> Carl:
>>
>> That is the only type of connector we use. They are very solid and
>> save one extra splice for each positive or negative lead. See:
>> http://millersolar.com/MillerSolar/practices/Technical_Procedures/PV_
>> wiring/_PV_wiring.html
>>
>> Just yesterday, working with a machinist, we figured out a simple
procedure for modifying a 1/2" threaded plug to accept the threaded stud
on the back of these connectors. Now we can thread these into 1/2" hubs
on bell boxes. Very handy.
>>
>> We have only ordered them in quantities of 100.
>>
>> Good luck,
>>
>> William
>>
>>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.455 / Virus Database: 271.1.1/4245 - Release Date: 03/01/12
19:34:00
Miller Solar
Voice :805-438-5600
email: will...@millersolar.com
http://millersolar.com
License No. C-10-773985
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
