You should be able to common the stator windings to give you 120V. If you can show me a wiring diagram I can tell you the wire numbers to connect.
On Tue, May 22, 2012 at 11:47 PM, mac Lewis <maclew...@gmail.com> wrote: > Hello wrenches, > > Does anyone have any good instructions or advice on how to rewire an older > Kohler 10RY generator to 120VAC from 120/240? I have heard it is simple, > but haven't gotten anything specific yet. > > Thanks! > > -- > > > > Mac Lewis > > * > > "Yo solo sé que no sé nada." -Sócrates > * > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > > -- Chris Mason President, Comet Systems Ltd mas...@cometsystems.co www.cometsystems.co Cell: 264.235.5670 Int: +1305.767.2094 Skype: netconcepts
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org