I have had the opportunity in the past few years to learn a lot about good roofing waterproofing practices according to the national roofers association.
They don't agree that caulk works as the primary means of sealant, which is what you are doing with an L foot. And given that we have really good off the shelf approved flashed feet, why would you use anything else? My 2 cents, Jay peltz power On Jun 29, 2012, at 5:16 AM, Glenn Burt wrote: > We have used a variety of sealants over the years, and determined simple > Henry roofing cement is the best product for use on comp roofing. > > We also used to bend our own L-foot flashing, which we cut from standard Al > coil stock (before all the manufactured options were available). This might > be a good option for you in this case. > > > > Glenn > > From: re-wrenches-boun...@lists.re-wrenches.org > [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Drake > Sent: Thursday, June 28, 2012 6:40 PM > To: RE-wrenches > Subject: [RE-wrenches] L feet no flashing in shingle roof > > I'm quoting a job that has an existing array with L feet bolted down to a > shingle roof with no flashings. I want to match the height of the existing > array. Also some modules are being worked in around skylights where it is > unlikely that room would be available for flashings to center over rafters. > > I've always used flashings. Would it be completely crazy to follow suit of > the existing array and bolt L feet straight to the shingle roof with good > roof sealant? If so, how would you seal it? > > Thanks, > > Drake > > Drake Chamberlin > ATHENS ELECTRIC LLC > OH License 44810 > CO license 3773 > NABCEP Certified PV > >
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
