Hi Jay, We use a Makita BFL300F "nut runner". They are expensive and hard to find, but a great tool for torquing down top clamps. It is nice and long for reaching over modules. We got ours from EF Bailey.
Cheers, Mark ---- Mark Westbrock Las Cruces Branch Manager NABCEP Certified Solar PV Installer NM ER-1J Journeyman Electrician Positive Energy, Inc. Las Cruces, NM office: 575-524-2030 cell: 575-640-2432 westbr...@positiveenergysolar.com www.positiveenergysolar.com On Sat, Aug 4, 2012 at 1:56 PM, jay peltz <j...@asis.com> wrote: > Hi All, > > Has anyone found a adjustable impact or drill that can be torque set? > > IE for installing racking/ modules? > > thanks, > > jay > > peltz power > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org