All -
We attempted a couple of jobs with the S5! kit and no rails and lining everything up was tough. Pro Solar rail directly to the S5! clamps works great or Unirac with L feet even gives more installation flexibility. Sounds like almost all of the responses are along these same lines. -August *From:* re-wrenches-boun...@lists.re-wrenches.org [mailto: re-wrenches-boun...@lists.re-wrenches.org] *On Behalf Of *Glenn Burt *Sent:* Monday, August 20, 2012 10:27 AM *To:* 'RE-wrenches' *Subject:* Re: [RE-wrenches] S5! question And if used with rails, helps with lowering module temperature (increasing distance from roof) as well as discouraging rodent nesting (again the further away from the roof deck the modules is, the less likely nesting is to occur) in my experience. -Glenn *From:* re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] *On Behalf Of *Jason Szumlanski *Sent:* Monday, August 20, 2012 11:27 AM *To:* RE-wrenches *Subject:* Re: [RE-wrenches] S5! question I agree - the regular S-5! clamps with L-Feet and rails adds a lot of flexibility. Plus, it is compatible with microinverter installations. Jason Szumlanski Fafco Solar On Mon, Aug 20, 2012 at 10:56 AM, Solarguy <nt...@1scom.net> wrote: The S-5 Kit must be adjusted with the jam nuts potentially at every clamp location to keep the modules from being forced to follow the roof contour. We have always used L-feet and rails mounted to the standard S-5 clamps since it creates a flat surface for the pv. Jim Duncan North Texas Renewable Energy Inc www.ntrei.com NABCEP PV 031310-57 TECL-27398 nt...@1scom.net 817.917.0527 -----Original Message----- From: re-wrenches-boun...@lists.re-wrenches.org [mailto: re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of jay peltz Sent: Monday, August 20, 2012 9:17 AM To: RE-wrenches Subject: [RE-wrenches] S5! question Hi All, I'm doing a S5! PV kit install for the first time. Any tips, advice ? thanks, jay Peltz Power _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org