I should have mentioned it is the ES-195-RL. I was under the impression that this module was not microinverter compatible due to it's lower operating voltage. Aren't Enphase micros limited to 60 or 72 cell modules (or multiples of 60 like the 120 cell Evergreen -FC3)?
The ES-195-RL specs: Vmp 27.1 Imp 7.2 Voc 32.9 Isc 8.18 Cells 108 *Jason Szumlanski* *Fafco Solar* On Fri, Sep 14, 2012 at 2:02 PM, William Miller <will...@millersolar.com>wrote: > Jason: > > Just about any inverter that starts with the word "micro." > > William > > > > > At 10:52 AM 9/14/2012, you wrote: > > I'm running into a scenario where some customers have three or four > Evergreen ES-195 modules already mounted on their roof that were used for a > non-grid-tie application, and now want to convert them to a grid-tied > system. I looked at the Sunny Boy 700 only to find out it will not be > suitable. Anyone know of a small grid-tie inverter that could result in a > cost effective way to "salvage" these modules on the roof? > > *Jason Szumlanski** * > > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > >
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org