Jesse:
How are you going to avoid crushing the foam when you tighten your fasteners?
William Miller
At 06:00 PM 12/11/2012, you wrote:
Hello,
The roof I'm currently working on is not a typical roof. The construction
is as follows:
2"x6" tongue and groove exposed inside, with 4 inches of foam (blue board)
and on top of that 3/4" plywood with asphalt shingles on top of that.
I'd like to make a template to ensure that my pilot bit doesn't wander
when I'm going through the blue board. If I miss the beams inside, the
hole or the lag would be exposed.
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
