Look into Amodon ferrite cores.
On 2/19/2013 1:30 PM, Vince McClellan wrote:
Hello Wrenches
I'm having an issue with a pair of Outback inverters producing
electromagnetic interference with the low band radios at a site we
installed recently. Other than a Faraday cage does anyone have any
methods of reducing the EMI from Outback inverters? I've been looking
in to ferrite cores but can't seem to find a source that lists what
the frequency is that is dissipated by the ferrite cores that I can
find online. I need the ferrite cores to be in the range of 250kHz to
2MHz.
Thanks,
Vince McClellan
Energy Design
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
--
Frank Lewon
BZ Products INC.
8801 Gravois Rd.
St. Louis MO 63123 USA
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
