Kelly,
I don't know this for certain, but I used an SW+2524 in my own
home system for 8 years (great inverter, by the way), so I have
experience with both the SW and SW+. I would be careful about
using the SWRC, which was designed for (and identical to the
control panel on) the SW series, and the entire control algorithm
of the SW+ is different than the SW. Having never tried it, I
would be cautious about compatibility. The ICM was designed for
the SW+, I think.
Allan
Allan Sindelar
al...@positiveenergysolar.com
NABCEP Certified Photovoltaic
Installer
NABCEP Certified Technical Sales Professional
New Mexico EE98J Journeyman Electrician
Founder and Chief Technology Officer
Positive Energy, Inc.
3209 Richards Lane (note new address)
Santa Fe, New Mexico 87507
505 424-1112
www.positiveenergysolar.com
On 5/23/2013 12:55 PM, Kelly Larson wrote:
Thanks, Bill. That is what they have been doing, but
then they loose their setpoints... The camp is 1 1/2 hours from
me and needs more stability than that. I hope the remote fixes
the problem. Is that likely?
I am hearing several possibilities for the remote: the SWRC,
the ICM, ... What do I need? Again, it's an SW Plus 2524 from
2005.
On May 23, 2013, at 5:38 AM, frenergy wrote:
Kelly,
When I've had that problem with my SW
remote display in the past, a little poke in the reset
hole took care of it for me. The remote display looks
identical to the one on the inverter. The reset is on
the lower left of the display. You lose your settings
but it's always brought back the bottom line to be
able to see what you're doing.
Bill
<FRS_working_logo.jpg>
----- Original Message -----
Sent: Wednesday,
May 22, 2013 8:13 AM
Subject: [RE-wrenches]
Xantrex SW Plus ICM Remote anyone?
Hello,
I have an off-grid client who is having trouble
with his SW Plus display. (Second line of display
is intermittent). I never installed SW Plus, and
don't know the ins and outs of them. I understand I
may be able to plug in a remote, (I think called a
ICM remote), and be able to reliably get to the
settings. Anyone know about this problem? Have a
ICM remote for sale?
Blessings,
Kelly
Kelly
Larson
Box 504
Ukiah, CA
95482
707-223-3209
Electrical
Engineer
NABCEP
Certified
Solar
PV Installation
Professional
ISPQ
Master Trainer
CA Electrical
Contractor#
868189
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
|