Looks like SnapNRack. Get some new bolt and clamp sets before you start
loosening anything. The SS bolts can spall, and the last one we worked
on, we had to replace 1/3 of the hardware. We used anti-seize thread
lubricant and a torque wrench on reinstallation. SnapN Rack seems
pretty decent overall, just hard to remove if over torqued.
R.Ray Walters
CTO, Solarray, Inc
Nabcep Certified PV Installer,
Licensed Master Electrician
Solar Design Engineer
303 505-8760
On 7/31/2013 2:21 PM, All Solar wrote:
Can anyone please identify the rail on the photo?
Regards
Jeremy Rodriguez
AllSolar
Sent by Jeremy's iPhone. Sorry for typos and shorthand!
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
