Hello Wrenches,
We are moving a roof vent. My plumber suggested that we cut the old
one and cap it instead of having to repair the roof. I'm not sure a
capped vent would be short enough to fit under the array.
What if we were to cut the vent off at the flashing level and plug
the pipe. A rubber plug could be put in and topped with hydraulic
water-stop cement. Neoprene roof sealant could be spread on top of that.
Has anyone tried anything like that? Are there any other good
options? Can you see any issues with this method?
Thanks,
Drake
Drake Chamberlin
Athens Electric LLC
OH License 44810
CO License 3773
NABCEP Certified Solar PV
740-448-7328
<http://athens-electric.com/>http://athens-electric.com/
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
