How is TEK 90 referenced in the NEC? Does it meet the qualifications to
be used inside an attic for instance?
Finally the onestopbuy link was very light on info; are the cables
inside stranded or solid?
Thanks,
R.Ray Walters
CTO, Solarray, Inc
Nabcep Certified PV Installer,
Licensed Master Electrician
Solar Design Engineer
303 505-8760
On 10/9/2013 12:02 PM, Hilton Dier III wrote:
William,
We get it with two pairs of color coded #8 copper and a #10 ground.
Off the shelf you can get #14, #12, #10, #8, and #6 and on up to 500
MCM. The 14-10 go up to 10 conductors and the 8 and 6 go up to 4
conductors.
Here's a URL, not the cheapest place, but to give you an idea:
http://www.onestopbuy.com/wire-cable/Product-Price-Code-TK-40629.asp
Graybar had the best price for us.
You can also get it custom in big quantities from some manufacturers.
If you support it every 18" or so it stays straight. The end
connectors are a bit of a PITA to assemble. The key is to cut the end
of the armor cleanly and as directed and then disassemble the
connector and put it on piece by piece. Takes a couple of minutes.
Hilton
--
Hilton Dier III
Renewable Energy Design
Partner, Solar Gain LLC
453 East Hill Rd.
Middlesex, VT 05602
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org