Thanks WIlliam, Some of the old Milbank units are 320 amp rated socket. The Murray 2 x 200's are 400 amp rated.
Best regards, Abe -- J. Abraham Powell President Solforce Systems, Inc. 224-G South Milpas Street Santa Barbara, CA 93103 Phone: (805) 695-0015 Fax: (805) 565-1661 Cell: (805) 895-2355 e-mail: a...@solforce.com On Jan 23, 2014, at 12:30 PM, William wrote: > John: > > These panels are typically rated only 320A continuous duty, so I think your > numbers would not compute. > > William > >> On Jan 23, 2014, at 11:31 AM, John Powell <a...@solforce.com> wrote: >> >> Has anyone tried to connect one 40 amp inverter output circuit to each of >> the two breakers on a 2 x 200AMP single meter main panel in California? >> > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Change email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
