Where can we buy the Radius Power line filters?
On Mon, Apr 14, 2014 at 2:49 PM, Nick Soleil <nsol...@enphaseenergy.com>wrote: > Hi Benn, > > You can remove the microinverters from an Envoy, but it requires a laptop > and a network cable. Call me and we can talk. We have a lot of big > projects with home builders, and I am more than happy to share our best > practices with you. My cell number is 707-321-2937. > > > On Mon, Apr 14, 2014 at 11:42 AM, Benn Kilburn <b...@skyfireenergy.com>wrote: > >> August, >> I'm being told that "we" (as opposed to "Enhpase") cannot delete or >> remove rogue inverters from the Array Builder. Enphase has to do this >> step. And if you just don't include the rogue inverters in the Array >> Builder you are building for a particular system, you will still receive >> the production data from the rogues. (2nd hand info, so......?) >> >> Louis, >> Since some of these are home builder's 'show homes' and new home builds, >> there is the possibility that internet has not always been set up yet, so >> in some of these cases the inverters may not have been dedicated to a >> particular Envoy yet. >> >> If "we" cannot remove rogue inverters from a particular Envoy, then we >> will likely just send the serial numbers of the Envoy and respective >> inverters to Enphase and let them sort it out. >> >> We may consider the Array Gun scanner option. >> >> Anyone else have any feedback on this option? >> >> >> Cheers, >> Benn >> >> >> >> On Mon, Apr 14, 2014 at 12:21 PM, Louis Woofenden <lo...@woofenden.net>wrote: >> >>> >>> Hi Benn, >>> >>> We've run into these problems when simultaneously commissioning systems >>> in adjacent units of a housing development where we did PV systems on all >>> homes, and 2-3 homes are on one utility transformer. I'm a little surprised >>> that the Envoy picked up inverters from an existing system, unless those >>> microinverters were never associated with another Envoy. My understanding >>> from Enphase is that once they are "bound" to one Envoy, they won't be >>> easily picked up in a device scan. But maybe I'm missing something, or got >>> bad info from tech support. >>> >>> We've definitely had to work with Enphase tech support on a couple of >>> systems to remove inverters from one Envoy, then do a device scan on >>> another Envoy, as August suggested. Another option is to spend the money >>> for the Array Gun scanner (SocketMobile CHS7xi scanner), and use the iOS >>> Enphase Installer Toolkit app to build arrays and "provision" the Envoy, >>> sending the inverter serial numbers directly to the Envoy, without need for >>> a device scan. Not sure if this is worth it at the $450 retail price for >>> the scanner, but if you can find one used, it might be. I recently was able >>> to pick one up for about $250 used. >>> >>> Haven't yet had issues serious enough to require LCFs on residential >>> systems. Crossing my fingers on that one. >>> >>> Best, >>> >>> Louis Woofenden >>> >>> Net Zero Solar, Tucson, AZ >>> >>> >>> On 4/14/14, 9:08 AM, Benn Kilburn wrote: >>> >>> Wrenches, >>> I'm sure i read a thread on this list about dealing with this, i've >>> searched but cannot find it. If anyone recalls the subject line, please >>> let me know. >>> >>> We are dealing with setting up Enphase monitoring in neighborhoods >>> with other Enphase systems nearby and these 'other' systems are being >>> picked up by the EMU. >>> >>> A few weeks ago we finished a 14 module (3.5kW) install and i plugged >>> in the EMU to search for the inverters. As it was picking up the first few >>> inverters, it was showing several hundred kWh already produced??? Not bad >>> for a 14 module system being in operation for 10 min!!! (yes the inverters >>> were new, out of the box) >>> >>> After 30-40 min, the EMU had picked up 28 inverters in total. There >>> were 14 on the system we had just installed, and 14 on a house across the >>> street that we had installed back in Nov'13. I'm pretty sure it had picked >>> up the 14 across the street before picking up the ones we just installed. >>> Funny that we can sometimes have communication issues btwn the inverters >>> and EMU in some houses, and here we have EMU's picking up inverters across >>> the street!?! >>> >>> Anywho... has anyone dealt with this and streamlined a process with >>> Enphase to remedy this issue? >>> >>> Cheers, >>> Benn >>> >>> >>> _______________________________________________ >>> List sponsored by Home Power magazine >>> >>> List Address: RE-wrenches@lists.re-wrenches.org >>> >>> Change email address & >>> settings:http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >>> >>> List-Archive: >>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >>> >>> List rules & etiquette:www.re-wrenches.org/etiquette.htm >>> >>> Check out participant bios:www.members.re-wrenches.org >>> >>> >>> >>> _______________________________________________ >>> List sponsored by Home Power magazine >>> >>> List Address: RE-wrenches@lists.re-wrenches.org >>> >>> Change email address & settings: >>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >>> >>> List-Archive: >>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >>> >>> List rules & etiquette: >>> www.re-wrenches.org/etiquette.htm >>> >>> Check out participant bios: >>> www.members.re-wrenches.org >>> >>> >>> >> >> _______________________________________________ >> List sponsored by Home Power magazine >> >> List Address: RE-wrenches@lists.re-wrenches.org >> >> Change email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> List-Archive: >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> >> List rules & etiquette: >> www.re-wrenches.org/etiquette.htm >> >> Check out participant bios: >> www.members.re-wrenches.org >> >> >> > > > -- > > Cordially, > > *Nick Soleil* > > > *Field Applications Engineer* > > *Enphase Energy* > > Mobile: (707) 321-2937 > > > > <http://enphase.com/enlighten_content/myenlighten-launch-site/?utm_source=MyEnlightenPromo&utm_medium=Email_Sig&utm_campaign=MyEnlighten> > > *MyEnlighten is Coming. *Get > Ready<http://enphase.com/enlighten_content/myenlighten-launch-site/?utm_source=MyEnlightenPromo&utm_medium=Email_Sig&utm_campaign=MyEnlighten> > > > <http://www.enphase.com/commercial?utm_source=email&utm_medium=sig&utm_campaign=Comm2012> > > 1420 North McDowell > > Petaluma, CA 94954 > > www.enphase.com <http://www.enphaseenergy.com/> > > P: (707) 763-4784 x7267 > > F: (707) 763-0784 > > E: nsol...@enphaseenergy.com > > > NABCEP Certified Solar PV Installer #03262011-300 > > California C10 Licensed Electrician #986315 > > Texas Master Electrician #284451 > > <nsol...@enphaseenergy.com> > > “Don’t get me wrong: I love nuclear energy! It’s just that I prefer fusion > to fission. And it just so happens that there’s an enormous fusion reactor > safely banked a few million miles from us. It delivers more than we could > ever use in just about 8 minutes. And it’s wireless!” > > - William McDonough > > > This email message is for the sole use of the intended recipient(s) and may > contain confidential and/or privileged information. If you are not an > intended recipient, you may not review, use, copy, disclose or distribute > this message. If you received this message in error, please contact the > sender by reply email and destroy all copies of the original message. > > > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Change email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > > -- Chris Mason NABCEP Certified Solar PV Installer™ Solar Design Engineer Generac Generators Industrial technician www.cometsolar.com <http://www.cometenergysystems.com> 264.235.5670 869.662.5670 Skype: netconcepts
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
