Al, Not sure what you mean by "zero lot building"? Can you design/construct a ballasted "wall/structure" at the back of the array that could accommodate the inverters and load center on its 'out-of-the-sun' side. It could be a covered/vented cabinet. Are micro-inverters an option? That would make it easier to design/construct such a wall.
Benn On Tue, Apr 29, 2014 at 4:14 PM, Allen Frishman <amfr...@aeonsolar.com>wrote: > Hey Wrenchers, > I am looking for suggestions for building a shade structure on a flat roof > for inverters and load center. There is no bulk heads on this flat roof > and it is a zero lot building so there is no exterior wall available to > hang the inverters. No space inside the building either so the roof is > the only option. Any suggestions? I will be using a ballast racking > system so the array will not provide any shade. > > All ideas welcome and appreciated! > > *Al Frishman* > AeonSolar > > *(917) 699-6641 <%28917%29%20699-6641> - cell* > *(888) 460-2867 <%28888%29%20460-2867>* > *www.aeonsolar.com <http://www.aeonsolar.com/>* > > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Change email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > >
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org