I have systems up in snow country and we used to have issues with frames but once they were glued no more issues, solarworld is glued and many others also. The wire management we have done is small gutters that fits the wire and j boxes altogether any good sheet metal shop can brake long gutters for you even in color if you want. Jerry
On Thu, Jun 12, 2014 at 12:59 PM, Solar <dahlso...@gmail.com> wrote: > Silicon energy has a similar product. I've used the suction cup with their > product. The one thing I head about the lumos module is to be careful when > bolting the module down. A friend of mine cracked one when he tightened it > down. He said lumos was good on replacing the broken one by just charging > cost for a replacement. > > Jesse > > > > Sent from my iPhone > > On Jun 12, 2014, at 2:55 PM, "frenergy" <frene...@psln.com> wrote: > > Hey Chris, > > Sorry I can't help. I'm sure you've already researched this and I > certainly see where you're coming from concerning the snow's effect on PV > frames but is too much strength lost being frameless? Their data sheet > says the "static load is 50 psf, pretty low for snow country, on the other > hand would snow stay on the array?...it looks like an ice skating rink when > installed. Maybe get a look-see at Intersolar. You've got me curious also. > > > > Bill > > Feather River Solar Electric > Taylorsville > > ----- Original Message ----- > *From:* Chris Worcester <ch...@solarwindworks.com> > *To:* 'RE-wrenches' <re-wrenches@lists.re-wrenches.org> > *Sent:* Thursday, June 12, 2014 12:12 PM > *Subject:* [RE-wrenches] Lumos LSX250 modules > > Hello Fellow Wrenches, > > I’m interested in using the Lumos frameless LSX250 Series 250 watt modules > on an upcoming project. It’s a 9:12 pitch in deep snow country, and I like > not having a frame to worry about getting scrubbed off. > > I can see that wire management will be an issue upfront although their LSX > rail system does provide for some of that. We are coupling these with > Enphase M250 micro inverters, another wire management issue. > > We do have a set of 4 glass suction cups to be able to put a handle on > them. What else?? > > They say their Canadian, with an office in Boulder, Co. > > I am wondering if there are others installing these and what experiences, > along with the pro’s and con’s are in advance, thanks! > > > > Chris Worcester > > Solar Wind Works > > NABCEP Certified PV Installer > > Office 530-582-4503 > > Cell 530-448-9692 > > Fax 530-582-4603 > > www.solarwindworks.com > > ch...@solarwindworks.com > > > > ------------------------------ > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org