HI Lars, you don't mention the type of roof cover, guessing comp shingle?
have you looked at the DPW easy feet? A slight modification is to use flat flashing first, then anchor the easy feet through the flashing designed for exactly the roof you have jay peltz power On Sep 15, 2014, at 9:20 PM, Lars Ortegren wrote: > Wrenches, > I have a customer who has a system attached on a SIPS panel home, and I need > to find a solution to fix the never ending leak. For those of you that are > not familiar with SIPS, its structural OSB panels with foam in-between. We > first did the install six years ago using 20' sticks of unistrut running > vertically up the roof to catch the purlins every twelve feet. This method > hasnt held up over time. Im wondering if anyone out there has had a good > experience using any "decking direct" attachments that dont require an > attachment to a structural member. We have tried the Sunpower "smart mount" > (hated it) but Im looking for the right attachment that will work with Unirak > and give him a flashed penetration to add to the roof that we will > undoubtedly pay for. Any advise? > > -- > Lars Örtegren > > > > PO Box 480/149 E.Main St > Grass Valley, CA 95945 > Phone : (530)274-3671 Fax: (530)274-7518 > California C-10 Electrical Contractor #779624 > > > > ATTENTION > This E-mail may contain CONFIDENTIAL INFORMATION intended only for the use of > the Individual(s) named above. If you are not the intended recipient of this > E-mail, or the employee or agent responsible for delivering it to the > intended recipient, you are hereby notified that any dissemination or copying > this E-mail is strictly prohibited. If you have received this E-mail in > error, please immediately notify us by telephone at (530)274-3671 or E-mail > l...@cal-solar.com or cont...@cal-solar.com. > > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
