All my M215's are stable in the field. (100% of M190 and M380 replaced
at Enphase's cost)
Anyone using the M250? Any feedback?
Mark
On 2/8/2015 6:46 AM, Jason Szumlanski wrote:
M215 failures? I've seen only 1 or 2 out of thousands. The M215 was a
remarkable improvement over the M190. Are you having a different
experience?
Jason Szumlanski
On Fri, Feb 6, 2015 at 12:56 PM, Mark Frye <ma...@berkeleysolar.com
<mailto:ma...@berkeleysolar.com>> wrote:
Folks,
How is the Gen4 Enphase (M250) holding up in the field? Any marked
improvement over M215 in terms of failures?
Mark Frye
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
