We've found the M250 to be just as stable as the M215. Usually when we have an issue it's right out of the box.
Thanks, Will Will White Director of Construction - East Coast RGS Energy 64 Main St. |Montpelier, VT 05602 tel 802.223.7804 | mobile 802.234.3167 | fax 802.223.8980 RGSEnergy.com<http://www.rgsenergy.com/> | william.wh...@rgsenergy.com<mailto:william.wh...@rgsenergy.com> Confidentiality Note: This e-mail message may contain confidential or legally privileged information and is intended only for the use of the intended recipient(s). Any unauthorized disclosure, dissemination, distribution, copying or the taking of any action in reliance on the information herein is prohibited. E-mails are not secure and cannot be guaranteed to be error free as they can be intercepted, amended, or contain viruses. Anyone who communicates with us by e-mail is deemed to have accepted these risks. RGS Energy is not responsible for errors or omissions in this message and denies any responsibility for any damage arising from the use of e-mail. Any opinion and other statement contained in this message and any attachment are solely those of the author and do not necessarily represent those of the company. From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Mark Frye Sent: Sunday, February 08, 2015 12:15 PM To: RE-wrenches Subject: Re: [RE-wrenches] Enphase Gen4 - How Is It Doing? All my M215's are stable in the field. (100% of M190 and M380 replaced at Enphase's cost) Anyone using the M250? Any feedback? Mark On 2/8/2015 6:46 AM, Jason Szumlanski wrote: M215 failures? I've seen only 1 or 2 out of thousands. The M215 was a remarkable improvement over the M190. Are you having a different experience? Jason Szumlanski On Fri, Feb 6, 2015 at 12:56 PM, Mark Frye <ma...@berkeleysolar.com<mailto:ma...@berkeleysolar.com>> wrote: Folks, How is the Gen4 Enphase (M250) holding up in the field? Any marked improvement over M215 in terms of failures? Mark Frye
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
