Hi frank Yes you can. However, that might put the volts to low and get line loss issues. My hydro guru uses multi tap transformers to get the best output voltage. You'll need three, so,they don't have to be large for a 1kw turbine.
Jay Peltz power > On Mar 20, 2015, at 5:59 AM, frank -bz products <b...@brick.net> wrote: > > Why not use a 2:1 step down transformer? The open circuit VOC would be > manageable. Cost is reasonable too. > > Frank Lewon BZP. > > BZ Products INC. > 8801 Gravois Rd. > St.Louis MO 63123 USA > 314-644-2490 > www.bz-products.net > > > > --- > This email has been checked for viruses by Avast antivirus software. > http://www.avast.com > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
