What are you screwing the aluminum into? Any chance of getting a picture?
On Fri, Apr 17, 2015 at 9:08 AM, Matt Sherald <m...@getpimby.com> wrote: > Adam, > > I've used aluminum perforated sheet metal in the past. It matches the > other aluminum on the ground mount and it can be zipped up with self > drilling screws. Looks pretty sharp when it is done - kinda like it was > meant to be there all along. > > -Matt > > On Fri, Apr 17, 2015 at 7:20 AM, AE Solar <autonomousenerg...@gmail.com> > wrote: > >> Hey Wrenchers, >> >> Does anyone have suggestions for netting/protecting wires behind a ground >> mount (for keeping hands out of there...not animals). I have seen quite a >> few home-made'ish looking options on systems around here (screwing hardware >> cloth onto the back of frames/racking, etc) but am looking for a more >> professional option....ideally something that is as clean looking as >> possible. For what its worth the panels will be (4) high in landscape. >> Thanks for any thoughts. >> >> Adam >> >> Adam Katzman - Owner/Operator >> Autonomous Energies >> 4872 State Route 9G >> Germantown NY, 12526 >> www.AutonomousEnergies.com <http://www.autonomousenergies.com/> >> (518) 567-1468 >> > > >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org