Hi Jason, Have you or others been using the new UniRac SM mid and end clamps with the integrated bonding yet? My concern is the “Stainless steel Midclamp points, 2 per module, pierce module frame anodization to bond module to module through clamp.”
We had an MSI Alpha + self-bonding midclamp shatter the glass on an LG 280 last fall, as the factory set point was sticking out too far, so as it was being tightened down, on top of the module the point dug through the module’s top frame hitting the glass, shattering it. I do wonder if there are any issues with this “point” on the UniRac midclamps potential for doing the same damage? Chris Worcester Solar Wind Works NABCEP Certified PV Installer Office 530-582-4503 Cell 530-448-9692 Fax 530-582-4603 www.solarwindworks.com ch...@solarwindworks.com From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Jason Szumlanski Sent: Thursday, June 25, 2015 1:13 PM To: RE-wrenches Subject: Re: [RE-wrenches] SnapNrack That decision was based on our distribution network offering better pricing on Unirac, and engineers being comfortable with it. Now with the integrated grounding from Unirac, I can't see moving away from it again barring a significant cost benefit. It also stacks and stocks easier than the Ironridge rails. On Wed, Jun 24, 2015 at 5:55 PM, Dana Brandt <d...@ecotechenergy.com> wrote: Hi Jason, We've used Unirac for years but have been contemplating Ironridge. I'm curious what your experience was and why you went back to Unirac? Anyone else have input on best racking systems for flush-mounted residential systems on comp roof? Thanks, Dana Dana Brandt Ecotech Energy Systems, LLC www.ecotechenergy.com d...@ecotechenergy.com 360.318.7646 On Wed, Feb 5, 2014 at 12:09 PM, Jason Szumlanski <ja...@fafcosolar.com> wrote: By Snap N Rack, you mean Sun Run... http://cleantechnica.com/2014/02/05/sunrun-acquires-rec-solars-residential-business-aee-solar-snapnrack-means/ I'm curious if these vertical integrators will still make their acquired brands available to small dealers through distribution. When SolarCity snatched up Zep, I had concerns about being able to service or add onto existing Zep systems we installed. That's definitely a concern going forward, and reason to perhaps stick with the most compatible racking solutions available. We used IronRidge for a while, which is largely compatible with Unirac, but now we're back on the Unirac bandwagon. Interesting times... Jason Szumlanski Fafco Solar <https://wisestamp.appspot.com/pixview.gif?p=chrome&v=3.31.0&t=1391630669252&u=ce9344a8140ce271> On Wed, Feb 5, 2014 at 12:45 PM, Max Balchowsky <m...@seesolar.com> wrote: We have been using Snap N' Rack for a while, Have lots of installs in Hawaii - so far no problems, I like the convenience of the design for snapping in the slider nut in mid rail, and also the ability to install the panels flush with the end of the rails…. Max Balchowsky Design Engineer SEE Systems 1048 Irvine Ave Suite 217 Newport Beach, Ca. 92660 760-403-6810 "Building a Better Future For The Next Generation" _____ From: Allen Frishman <amfr...@aeonsolar.com> To: RE-wrenches <re-wrenches@lists.re-wrenches.org> Sent: Wednesday, February 5, 2014 6:17 AM Subject: Re: [RE-wrenches] SnapNrack I am curious about the mid clamps on the snapnrack. The flange that rests on top of the solar panel frame is so small ~ 3/16". Anyone experience any problems with these failing in a big storm? With solar panel frames not being square it is nice to have a little extra to grab - I am always curious as to why these clips are made with such a small area to hold the panels down. All feedback on these clips is appreciated. Al Frishman AeonSolar (917) 699-6641 - cell (888) 460-2867 www.aeonsolar.com <http://www.aeonsolar.com/> On Jun 1, 2013, at 10:41 AM, Max Balchowsky wrote: Have installed last three systems (35Kw)with snap n rack. love it.... Max Balchowsky Design Engineer SEE Systems 1048 Irvine Ave Suite 217 Newport Beach, Ca. 92660 760-403-6810 "Building a Better Future For The Next Generation" _____ From: Solarguy <nt...@1scom.net> To: 'RE-wrenches' <re-wrenches@lists.re-wrenches.org> Sent: Friday, May 31, 2013 10:11 PM Subject: Re: [RE-wrenches] SnapNrack The only complaint with the Snapnrack rails is the thin wall can easily be distorted. This will allow the nut to drop out of its groove. Love the universal end clamps but have learned to assemble every one to check for proper fit before getting on the roof. Jim Duncan -----Original Message----- From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Drake Sent: Friday, May 31, 2013 7:32 PM To: re-wrenches@lists.re-wrenches.org Subject: [RE-wrenches] SnapNrack Hello Wrenches, How would you rate the SnapNrack mounting systems against Unirac and other mounting systems? Thanks, Drake _______________________________________________ List sponsored by Home Power magazine List Address: <mailto:RE-wrenches@lists.re-wrenches.org> RE-wrenches@lists.re-wrenches.org Change email address & settings: <http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: <http://www.re-wrenches.org/etiquette.htm> www.re-wrenches.org/etiquette.htm Check out participant bios: <http://www.members.re-wrenches.org/> www.members.re-wrenches.org _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org <http://www.members.re-wrenches.org/> Preferences § 1 2 3 4 5 6 7 8 9 0 - = Backspace Tab q w e r t y u i o p [ ] Return capslock a s d f g h j k l ; ' \ shift ` z x c v b n m , . / shift English Deutsch Español Français Italiano Polski Português Русский alt alt Preferences _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
