All the way back to the module jboxes? Sounds pricey.
That is assuming the module jboxes accept conduit.
Indeed it I not only the home runs that need to be concerned with the PV
rating, but the module conductors as well, as there is no distinction made in
the code between them.
Sincerely,
Glenn Burt
Sent from my 'smart' phone so please excuse grammar and typos.
-----Original Message-----
From: "William Miller" <will...@millersolar.com>
Sent: 7/24/2015 16:59
To: "RE-wrenches" <re-wrenches@lists.re-wrenches.org>
Subject: Re: [RE-wrenches] SMA 1800u not generating power
Put it in conduit.
> On Jul 24, 2015, at 8:14 PM, Glenn Burt <glenn.b...@glbcc.com> wrote:
>
> How do you get around the code requirement for the use of PV wire with a TL
> inverter on the existing array?
>
> Sincerely,
> Glenn Burt
> Sent from my 'smart' phone so please excuse grammar and typos.
> From: jerrysgarage01
> Sent: 7/24/2015 12:57
> To: RE-wrenches
> Subject: Re: [RE-wrenches] SMA 1800u not generating power
>
> SMA used to to do repairs but last I heard they no longer have replacement
> parts. I have used the new SMA TL-22 because of the low voltage dc input. If
> you added some additional modules to the "B" input it might qualify for the
> tax credit (I did say might)
> Good luck
> Jerry
>
>
> Sent via the Samsung Galaxy S™ III, an AT&T 4G LTE smartphone
>
>
> -------- Original message --------
> From: Jason Szumlanski
> Date:07/24/2015 4:25 AM (GMT-10:00)
> To: RE-wrenches
> Subject: Re: [RE-wrenches] SMA 1800u not generating power
>
> Someone contacted me off list and said this company does out of warranty SMA
> repairs:
>
> http://www.shop.solarcowboyzoutlet.com/Inverter-Repair-Service-Inverter-Repair-Service.htm
>
> Looks like there is a risk in how big the repair is, but apparently they are
> willing to talk about the diagnostics before you send it in, and fix minor
> problems for a flat rate.
>
> One bad part about these small systems is that labor to repair or replace
> failed units can easily turn into a cost equivalent to years of energy
> production, not to mention the hardware cost itself... I've only sold a few
> "tiny" systems over the years, and never really considered this. It makes
> much more financial sense for an owner to replace a failed 5kW inverter when
> the labor is basically the same as a 2kW.
>
> Jason Szumlanski
>
>
>> On Fri, Jul 24, 2015 at 10:04 AM, Sky Sims <s...@ecologicalsystems.biz>
>> wrote:
>> This is a known issue. I've come across a bunch of their inverters that have
>> had this problem. In addition to seeing this issue on their 1800's I've seen
>> it happen on their 2500's as well. Shows a solid green light but isn't
>> putting out power.
>> The first time I came across this issue they had a refurbishment program,
>> where they would rebuild the inverter and send it back with a one year
>> warranty for under $400. The refurbishment program was a great program that
>> I hope they bring back someday.
>> The last few times I contacted SMA about one of these defective inverters,
>> they said the product was not under warranty and they no longer supported
>> it. Only option they gave was to buy a new unit.
>>
>> Sky Sims
>> Ecological Systems
>>
>>
>>> On Jul 24, 2015, at 5:49 AM, Jason Szumlanski
>>> <ja...@floridasolardesigngroup.com> wrote:
>>>
>>> I am looking at a 1800u from 2004 that has a green light and in mpp mode,
>>> but Pac is zero. Grid and DC voltage are good. No other indication of
>>> problems. I saw Pac tick up to 2W a couple of times, but that's it. It's
>>> just not delivering AC power.
>>>
>>> Any thoughts?
>>>
>>> Sadly, it doesn't make much financial sense for the owner to replace it
>>> with a current model, as the replacement cost would take almost 10 years to
>>> recover with the small BIPV array connected to it. I'm hoping for a field
>>> repair option.
>>>
>>> Jason Szumlanski
>>>
>>> _______________________________________________
>>> List sponsored by Redwood Alliance
>>>
>>> List Address: RE-wrenches@lists.re-wrenches.org
>>>
>>> Change listserver email address & settings:
>>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>>
>>> List-Archive:
>>> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>>>
>>> List rules & etiquette:
>>> www.re-wrenches.org/etiquette.htm
>>>
>>> Check out or update participant bios:
>>> www.members.re-wrenches.org
>>
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> List Address: RE-wrenches@lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive:
>> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> www.members.re-wrenches.org
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
[The entire original message is not included.]
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
