Hi Jay, I picked up a used McElroy 2LC butt welding set-up on Ebay for $600 a few years ago and I love it. It has jaw insert adapters for different size pipe and can work with 1/2" up to 2". Mine is an older version of this brand new one on Ebay now: http://www.ebay.com/itm/McElroy-2LC-Pipe-Fusion-Fusing-Machine-HDPE-Poly-Welder-/111701412359?hash=item1a01ec4a07:m:mIqZWpBNUDEB4pAMRmqAjMw
I mostly use it for coupling lengths of pipe together for irrigation and drinking water systems, and for connecting Tees and SS pipe thread adapters. Usually it seems I'm using it in (or near) a ditch and with my Honda EU2000 to power the heater plate. The newer approach is socket fusion instead of butt fusion. I have not tried it but it looks to have some advantages over butt welding, especially if you are using a lot of fittings. The welding process is more foolproof, the fittings are cheaper and the welds don't leave as big a bead of plastic on the inside of the pipe. It also looks like the same welder can be used with MDPE as well as HDPE. The only downside seems that you need to use coupling fittings for straight splices and you probably have to have the exact perfect pipe with the same SDR rating as the fittings and other pipe, whereas small variations in O.D. or I.D. are tolerable with butt welding. BTW, in a pinch it is entirely possible to butt weld HDPE without any of the expensive equipment. My first experience with the process was helping build a village water system in Nepal in 1989 where we used an iron plate on a long handle heated in hot coals before using it to soften the pipe ends for welding, and then pushing the ends together carefully by hand. And then years later but before I got my McElroy gear I successfully used a teflon coated hot plate to heat the pipe ends and a simple wooden jig with hose clamps to hold the ends together for a few welds. It works, but it takes significant time and getting reliable results takes practice. Trimming the end faces with a razor knife so they match perfectly for the weld is the most difficult and time consuming part. The McElroy equipment is much easier, faster and reliable for professional use. Best, Eric On Sun, Nov 22, 2015 at 3:55 PM, jay <jay.pe...@gmail.com> wrote: > Iām looking into buying a poly pipe welding/fusing machine. > 1ā-2ā sizes > > Does anyone have any recommendations/experience? > > thanks in advance > > jay > > peltz power > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org