That's a very trick way to do it! A somewhat less expensive way would be to use a 3rd VFX on the leg you want the added power on.
Jay Peltz power. > On Feb 1, 2016, at 9:09 PM, William Miller <will...@millersolar.com> wrote: > > Jeremy: > > I have often wondered this question since the Trace SW days: Since the > Radian offers generator support, why not connect the FX inverters to the > generator input of the Radian? Program the Radian to expect 30 amps per > leg. If the load exceeds 30 amps, the Radian will kick into gen-support > mode and aid the FX inverters. If the load is less than 30 amps, the > Radian goes to sleep. > > William > > > > Lic 773985 > millersolar.com > 805-438-5600 > > > -----Original Message----- > From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On > Behalf Of Jeremy Rodriguez > Sent: Monday, February 01, 2016 7:57 PM > To: re-wrenches@lists.re-wrenches.org > Subject: [RE-wrenches] Increasing output Amps, Off Grid > > Hello > I don't think an OB Radian can be added to an existing stacked pair of > FX's. At least easily and have all three inverters work happily with each > other. Can it? > > My client is wanting more output. Even if it's just one leg of 120/240. He > is planning to wire a circuit to an outbuilding. 120 v only is fine. He > has overloaded the dual 3648 set up once before. I recommended another > pair of FX3648 inverters with autoformer. > Comments and recommendations appreciated. > Thanks in advance > > Jeremy Rodriguez > Solar Installation And Design Expert > All Solar, Inc. > 1463 M St > Penrose Colorado 81240 > > Sent by Jeremy's iPhone. Sorry for typos and shorthand! > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.htm > l > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
