I just did a class exercise using the upcoming sw290 for sizing conductors and OCPD and the calculation was such that a 20 amp fuse was needed (rounding up from Isc x 1.56). I hope that the maximum reverse current on the spec sheet is also the maximum series fuse rating.
Kris On Mar 18, 2016 8:56 PM, "jay" <jay.pe...@gmail.com> wrote: > HI All, > > I was looking at the SW cut sheet. > It doesn’t mention series fuse rating. > > It does mention “maximum reverse current” > Is this the same thing? > > Or where would I find the series fuse rating. > > thanks > > jay > > peltz power > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org