Hi all, I thought I would provide a follow up to my mystery inverter problem
I was contacted by a few very talented senior inverter engineers and the problem pretty much has to be in the wiring loom. Comm wires, or connector/s etc. I will keep you all updated as to the next part of this fiasco Thx Jay Peltz power > On Jun 11, 2016, at 11:58 AM, Travis Jordan <tra...@jordansolar.net> wrote: > > Just a thought, but some of the old or cheap inverters don't take nicely to > bonding the ground to neutral. You may try leaving the ground wire > disconnected from the inverter for a test and see if that changes > anything.... Also make sure you don't have moisture or a short of some sort > in your output cable to the house, I got involved with a job once that had > normal Romex buried outside and it got wet and caused issues with the > inverter not working properly. It ohmed out fine, but when I hooked it up it > didn't play nice with the inverter. I would suspect something with the site > wiring from what I am understanding from your post. > > Good luck! > > Travis Jordan > tra...@jordansolar.net > tra...@mtsolar.us > > > -- > Travis Jordan > tra...@jordansolar.net > 877-215-8431, Ext. 104 > Cell: 406-274-1230 > Jordan Solar > jordansolar.net > > Solar PV Installer # 031409-69 > MT EL License # ELE-EJ-LIC-9886 > WA EL License# TRAVIJE901PK > ID EL Masters # 010810 > > _____ >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org