On 8/28/2016 9:14 AM, Jeremy Rodriguez wrote:
Do you if the wiring from the E panel will reach with the AC conduit
box in place on the FX?
Jeremy Rodriguez
Solar Installation And Design Expert
All Solar, Inc.
1463 M St
Penrose Colorado 81240
Can't remember 100% but the conduit box has one big knockout and we have
flex conduit around.
Some rewiring may be required but it is only 3 wires so no biggie.
If this is a custom E-Panel, and some of them are, then we can certainly
make it with longer wires.
boB
Sent by Jeremy's iPhone. Sorry for typos and shorthand!
On Aug 27, 2016, at 10:02 PM, "b...@midnitesolar.com
<mailto:b...@midnitesolar.com>" <b...@midnitesolar.com
<mailto:b...@midnitesolar.com>> wrote:
MidNite Solar stopped making the skinny OB E-Panels but we still make
many models of the wide OB E-Panels.
It still works fine with the OutBack surge arrestor in their AC
conduit box.
boB
On 8/27/2016 2:30 PM, Howie Michaelson wrote:
H Jeremy,
It has been years since I used Outback's Arrestors (I switched to
Midnite's so I'm not sure if Outback's design has changed since
then), but yes that is how it worked on an E-panel. However, I
think Midnite has stopped making the Epanel for the FX (FXR),
although maybe you can find one in stock at a supplier. Might be
worth a call to Midnite...
Howie
*Howie Michaelson*
/NABCEP Certified Solar PV Installer™/
Sun Catcher, LLC
Renewable Energy Systems Sales and Service
VT Solar Electric Incentive Partner
802-272-0004
On Sat, Aug 27, 2016 at 4:07 PM, Jeremy Rodriguez
<allsolarjer...@msn.com <mailto:allsolarjer...@msn.com>> wrote:
Wrenches,
Has anyone installed one of the outback Lightning protection
devices designed to fit inside the AC conduit box of an FX
inverter, with the FX mounted to an E panel?
Just looking at some pictures it appears that it may work by re
locating the flex conduits coming from the E panel, to the sides
of the OB ACA vs. where they originally land.
Any thoughts or experiences would be appreciated!
Jeremy Rodriguez
Solar Installation And Design Expert
All Solar, Inc.
1463 M St
Penrose Colorado 81240
Sent by Jeremy's iPhone. Sorry for typos and shorthand!
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
