wondering if anyone has a simple lug solution for a problem i found my self in. with out looking I used a meter socket for a REC meter that is not rated for #12 AWG wire. it is on a 20 breaker but wire size is too small for the lugs. Is there a simple Lug solution that will pass muster or do I need to up size wire or swap out the meter socket?
problem with up sizing the wire is we ran 1/2 conduit so we can only go up to #10. without overfilling or replacing the conduit run. Hoping there is experience out there that can point me to a simple solution. Thanks Daniel Tittmann CTO Greenwired www.greenwired.com dan...@greenwired.com 707-923-2001 (office) 707-206-5088 (Cell)
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
