Hi Lou, I”ve had a few customers doing this exact operation with no issues. It has been very consistent.
jay peltz power > On Feb 12, 2017, at 8:12 PM, Lou Russo <l...@spreesolarsystems.com> wrote: > > Aloha Wrenches, > > I have steered clear of the Mate 3 for as long as possible, I have burned > through my stash of FXs and now have been installing the FXRs and using the > Mate 3. I typically utilize AGS for my clients in a 2 - wire start with a > Diesel Genset setup. On 2 recently installed systems, one a FP2 and the other > a FP1, the clients require "Must Run" to function. Of course it does not > work. I can get it to work if I set the time for a few minutes later, but not > for the next day. I have not used this feature ever in the past but since it > is in the manual I wrongly assumed it would work. I am running firmware > version 3.015 on both Mates. Tech support just wants me to do a factory reset > and reprogram. That did not work. > > Anybody else having issues getting this feature to work? > > On a related note, software problems are becoming a systemics issue in our > industry. Being recently burned by Schneider because of a software issue (to > the point of breaking an appliance), now this, and endless other little bugs > from almost every manufacturer my frustration level with software in the > off-grid world is at a all time high. Given the importance of supplying power > I firmly believe our manufactures can not and should not take the same > approach to software as Silicon Valley does. "Fail early and often" may work > for Facebook, Google and Uber but it has no place in our industry. Keep it > simple and fight the urge to engage in feature creep. PLEASE. > > > Aloha, > > Lou Russo > l...@spreesolarsystems.com <mailto:l...@spreesolarsystems.com> > 440 345 6762 <tel:(440)%20345-6762> > Spree Solar Systems LLC > CT-34322 > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org