Hi Dave, Did you replace the temp sensor?
Jay Peltz power. > On Apr 30, 2017, at 6:30 AM, Dave Palumbo <palumbo1...@gmail.com> wrote: > > Wrenches, > > We recently swapped in a new internal fan on a OB FX 2524T after the original > fan stopped working on the 6 yr old inverter. > > Now the new internal fan is running all the time. Unrelated to temperature > (Air, Fet and Cap temps all good). I've tried removing all loads from the > inverter and also resetting the inverter (off/on). > > OutBack tech support says the control board is the most likely cause of this > problem and that I should buy a new board and swap that in. Or, as another > option he said I could let the fan continue to run 24/7. > > Any advice? > > Thanks, > Dave > > David Palumbo > Independent Power LLC > 462 Solar Way Drive > Hyde Park, VT 05655 > 802-371-8678 cell > 802-888-4917 home > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
