We've also made them from Unistrut nested into square tubing. Drill a
hole close to the top of the square tube and use a 3/8" bolt and strut
nut. Either 1-3/4" or 2" thin wall Square tube works.
Ray Walters
On 10/24/17 7:57 PM, Allan Sindelar wrote:
Try Jeff Randall at RC Fab in Albuquerque. j...@solarrackworks.com,
(505) 288-5552.
Allan
On Oct 24, 2017, at 4:48 PM, jay <jay.pe...@gmail.com> wrote:
Hi All,
I’m having trouble finding adjustable slide style back legs for a client who
wants to adjust his low profile array.
I can’t find them from Iron Ridge, Unirack, DPW,
Where/who can I get them from?
thanks
jay
peltz power
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
