Depends on the seam profile. Same device may be used in many cases. We have Also drilled and used the standard direct burial lugs on the underside of the pans, at the wave when they hang over enough to get working space. Then a horizontal run of copper wire to connect. Don't be lulled into thinking that S-5 clamps are listed for grounding roof pans - they are not. They are only listed for module bonding to ground. Sent from my 'smart' phone so please excuse spelling and typos. ------ Original message------From: AE SolarDate: Sun, Jun 17, 2018 8:46 PMTo: glenn.b...@glbcc.com;Cc: RE-wrenches;Subject:Re: [RE-wrenches] grounding on metal roofs thanks glenn. and what about commercial? anyone have code references regarding grounding when doing solar on metal roofs? i thought a few years back there was a conversation on this but i can't seem to find it. Adam Katzman Autonomous Energies PO Box 1245Kingston, NY 12402 www.autonomousenergies.com (518) 567-1468
On Sun, Jun 17, 2018 at 1:46 PM, glenn.b...@glbcc.com <glenn.b...@glbcc.com> wrote: We use the Ilsco SGB-4 ground lug on every pan under the array for residential systems. -Glenn Sent from my Verizon LG Smartphone ------ Original message------From: AE SolarDate: Sun, Jun 17, 2018 12:29 PMTo: RE-wrenches;Cc: Subject:[RE-wrenches] grounding on metal roofs wrenchers,what methods are you all using for grounding on metal roofs? thanksadam Adam Katzman Autonomous Energies PO Box 1245Kingston, NY 12402 www.autonomousenergies.com (518) 567-1468
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org