Diversion load controller and diversion loads will work every time, no matter what the equipment.
Dan Fink Professor of Solar Energy Technology, Ecotech Institute IREC Certified Instructor™ for: ~ PV Installation Professional ~ Small Wind Installer Executive Director, Buckville Energy NABCEP Registered Continuing Education Providers™ NABCEP PV Associate 970.672.4342 On Wed, Sep 12, 2018 at 7:31 PM Wayne Irwin <pureenergyso...@hotmail.com> wrote: > Looks like standard AC coupling. > > We typically just redo the whole system rather than retro fit. Depending > on the system size, it's usually not that much more work (racking is > already up) and the end result is always a regulated charge to the > batteries. > > > It would be great if someone would come up with a regulated AC coupled > charge versus an all or nothing approach via phase shifting or relay > controlled. > > > Wayne Irwin > President > License #CVC56695 > State Licensed Solar Contractor > Pure Energy Solar International Inc. > wa...@pureenergysolar.com > http://PureEnergySolar.com > http://SolarChargingStation.net > 352 377-6527 Office > 352 336-3299 Fax > > > The Sun Is Always Shining! > > The content of this message is Pure Energy Solar Confidential. If you are > not the intended recipient and have received this message in error, any use > or distribution is prohibited. Please notify me immediately by reply e-mail > and delete this message from your computer system. Thank you. > > > > ------------------------------ > *From:* RE-wrenches <re-wrenches-boun...@lists.re-wrenches.org> on behalf > of Ken Schaal <k...@commonwealthsolar.com> > *Sent:* Wednesday, September 12, 2018 8:11 PM > *To:* RE-wrenches; Ken Schaal > *Subject:* [RE-wrenches] Any thoughts on this approach to adding battery > backup to an existing grid tie system will be appreciated. > > https://www.youtube.com/watch?v=eyhkIfS5Z-Q > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
