That's what we are looking at, but it's harder to design for this application, if I didn't have to cost it, I would just go with it. We use it for ground mount, and it is the strongest racking for tough conditions. I think it is what we will end up with.
On Wed, Sep 19, 2018 at 3:20 PM, Chris Worcester <ch...@solarwindworks.com> wrote: > You might consider the SnapNrack Series 200 ground mount system, we > adapted it to work well on a raised roof mount before. > > > > Chris Worcester > > Solar Wind Works > > NABCEP Certified PV Installer > > Office 530-582-4503 > > Cell 530-448-9692 > > www.solarwindworks.com > > ch...@solarwindworks.com > > > > *From:* RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] *On > Behalf Of *Chris Mason > *Sent:* Wednesday, September 19, 2018 10:08 AM > *To:* RE-wrenches > *Subject:* [RE-wrenches] Raised racking system > > > > I'm quoting a job on a concrete roof with three foot parapet walls. I'd > like to raise the arrays about 24 inches above the roof to minimize > shading, does any one have a solution for this application? > > > > -- > > Chris Mason > > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches. > org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > > > -- Chris Mason NABCEP Certified Solar PV Installer™ Solar Design Engineer Generac Generators Industrial technician www.cometsolar.com <http://www.cometenergysystems.com> 264.235.5670 869.662.5670 Skype: netconcepts
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
