Maybe an application of Rain-x to the modules would help. Of course not on 
anything with a topical anti-reflective surface.
Sent from my 'smart' phone so please excuse spelling and typos.
------ Original message------From: frenergyDate: Sat, Dec 1, 2018 1:20 PMTo: 
re-wrenches@lists.re-wrenches.org;Cc: Subject:[RE-wrenches] Vertical PVs for 
Comm site
Sierra wrenches,

             My 30 years of installation has never included comm sites 
on mountain tops but I took the job.....

I am proposing mounting PVs vertically towards the top of the south wall 
of a 2 story block building to avoid snow build-up.  I assume a 
pole-mount would be next in line if we needed more sq ft of PV.  
However, even if vertical, will Sierra snow (its a special breed) still 
wind-pack on, stay for weeks, days, not at all?  This site is on the 
Pacific crest at 7,000 ft.

             And then  due to potential temps down to -30F, I assume a 
WELL insulated battery box (maybe even back-up heat?). It seems the best 
choice would be to use AGM/VRLA/Gel?    Part my reason for looking for 
help is my customer's loads will only be 12 volt and wants to avoid the 
cost of an inverter.  This seems a little risky not to have an 
inverter/charger for back-up. Appreciate the advice.

Bill

Feather River Solar Electric
Bill Battagin, Owner
4291 Nelson St.
Taylorsville, CA 95983
530.284.7849
CA Lic 874049
www.frenergy.net


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Reply via email to