I've got quite a few Magnum PAEs installed and have not seen this before.  I have one I'm about to install, so I just bench tested it and I did see the fluctuation.  It was cycling from 116vac to 122 vac about every 5 seconds.  As far as Magnum claiming this is "Normal" off grid operation, well, we may be switching inverter brands, because that is the "Wrong" answer.  This reminds me of Xantrex's infamous TR inverters that caused lights to blink on/off, and fridges to cycle every minute.  It wears on appliances and customers' nerves.

Normal operation is stable 120 vac 60 Hz, sine wave. period.  I'm calling Magnum right now, I don't know what they did, but they need to undo it right away.

Ray Walters
Remote Solar
303 505-8760

On 12/13/18 8:15 AM, Drake wrote:
I had a PAE 4024 run high voltage so that it wouldn't AC couple at all. My older PAE does not fluctuate.

At 08:14 PM 12/12/2018, you wrote:
Hi all, I’ve had the following issue with a new PAE 4024. It’s ac voltage will rise and fall about 10+ volts ( 124-115) over about 10 seconds like clock work. Regardless of the load, or battery SOC/voltage. I checked with a local shop, they also have the issue. They checked all their back stock and they all did the same thing. However they had an older one, say 6 months old that didn’t do it. Nor do any of my previous magnum installs do this. Clients are not too thrilled with this as lights go up and down in brightness. Magnum’s response was that this is normal for an off grid inverter and that somehow this “feature” has to do with it being able to AC couple better. I’m writing to ask if others have seen this as well and more importantly if anyone has a fix? Thanks, Jay Peltz Power _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org

_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Reply via email to