Hi Mark The Schneider XW model is 75% of max VA per line. (6800 x .75)
The radian would be something like that, but I couldn’t find it on the spec sheet. Jay > On May 25, 2020, at 3:19 PM, Mark Frye <ma...@berkeleysolar.com> wrote: > > OK, so with a Radian or XW what is the per-phase % of total rated power? 50%? > >> On 5/25/2020 2:16 PM, Dave Angelini Offgrid Solar wrote: >> From what I have seen most folks get into trouble with split phase because >> they are using too small of an inverter. For a home or larger I only use >> the big radians or an XW's. >> >> Some do have problems because they are refitting an old 120vac power >> system to split phase and the load panel was never balanced at all. >> >> Dave Angelini Offgrid Solar >> "we go where powerlines don't" >> http://members.sti.net/offgridsolar/ >> e-mail offgridso...@sti.net >> text 209 813 0060 >> >>> On Mon, 25 May 2020 14:08:03 -0700, Mark Frye <ma...@berkeleysolar.com> >>> wrote: >>> Folks, >>> >>> Back again into the way back machine, I once installed a system with >>> multiply FX's stacked in a split-phase configuration. At the advice of >>> the engineer, I also installed an auto-transformer across the lines to >>> help balance the per-phase loads. >>> >>> With the current split-phase inverters (Outback, Schneider, Magnum) what >>> is the per-phase rating? Do any or all of them deliver 100% output >>> rating to a single phase? If not, what is the max percentage output is >>> allowed on a single phase? Do folks have to spend alot of time making >>> sure there split-phase loads are balanced? >>> >>> Thanks, >>> >>> Mark >>> >>> _______________________________________________ >>> List sponsored by Redwood Alliance >>> >>> List Address: RE-wrenches@lists.re-wrenches.org >>> >>> Change listserver email address & settings: >>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >>> >>> List-Archive: >>> >> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html >>> List rules & etiquette: >>> www.re-wrenches.org/etiquette.htm >>> >>> Check out or update participant bios: >>> www.members.re-wrenches.org >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> List Address: RE-wrenches@lists.re-wrenches.org >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> List-Archive: >> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html >> >> List rules & etiquette: >> www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> www.members.re-wrenches.org >> > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org