If you are going to replace the meter socket, using a 200 amp Milbank and a set of Milbank Step Lugs https://www.milbankworks.com/products/catalog/K4977-INT makes a nice clean solution.
On Thu, Jun 18, 2020, 7:58 AM Christopher Warfel < cwar...@entech-engineering.com> wrote: > Hello Wrenches. Does anyone have a recommendation for an oversized > utility meter enclosure that would provide sufficient space for a line > side tap? It would be 6AWG from the PV system tapping into 2AWG Service > Entrance Conductors. Thank you for any recommendations. Chris > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
