has anyone successfully done this without removing the inverter from the wall?
todd On Sunday, February 14, 2021 6:26pm, "Foxfire Energy" <d...@foxfire-energy.com> said: Fan replacement is easier than boards Sent from my iPhone On Feb 14, 2021, at 9:00 PM, John Blittersdorf <john.blittersd...@gmail.com> wrote: Hi Ron, Yes it is field repairable. Just open up the inverter and the fan is in that outer housing. When lifting the case up, remember the fan power wire needs by be unplugged as you lift the case as not to rip it off the circuit board it is attached to. Then you will just turn the case over and remove the fan and replace with the new one. Then carefully plug it back in before completing the replacement of the case. If you haven’t opened one up before, the red and black round plastic spacers on the dc terminals are screwed off, the six small Phillips head screws removed from the exposed AC board, and the 8 screws holding the case to the inverter base removed and lift the case up part way until you can see the fan wire. John Blittersdorf CV Wind Service On Sun, Feb 14, 2021 at 8:15 PM Ron Young <[ solarea...@solareagle.com ]( mailto:solarea...@solareagle.com )> wrote:Hi Wrenches, I have a client with an Outback GVFX3524 inverter that has had a fan failure. I will check with Outback but thought I might get a head start here. Is this a field replaceable item? I know the boards are but not sure about the fan. Any info much appreciated, thanks. Ron _______________________________________________ List sponsored by Redwood Alliance List Address: [ RE-wrenches@lists.re-wrenches.org ]( mailto:RE-wrenches@lists.re-wrenches.org ) Change listserver email address & settings: [ http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org ]( http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org ) There are two list archives for searching. When one doesn't work, try the other: [ https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ ]( https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ ) [ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org ]( http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org ) List rules & etiquette: [ http://www.re-wrenches.org/etiquette.htm ]( http://www.re-wrenches.org/etiquette.htm ) Check out or update participant bios: [ http://www.members.re-wrenches.org ]( http://www.members.re-wrenches.org ) _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org Sent from Finest Planet WebMail.
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org