I've seen a couple of those old Trace breakers with damaged set screw connectors. Its been a while back but I replaced one of the old Trace breakers with a Magnum breaker. Easy replacement, but you'll need to put lugs on the cables. That's a good improvement anyway.

Kent Osterberg
Blue Mountain Solar


On 5/31/2022 9:15 PM, Jeremy Rodriguez via RE-wrenches wrote:
Hello
Does anyone have a good used 250A CB for the old DC250 by  Xantrex? I believe they are a GJ250? Or does any of the new equipment work. Kind of looks like the Magnum Energy breakers in a MMP.
Contact me off list If necessary.
Regards,


Jeremy Rodriguez
Solar Installation / Design Expert
All Solar, Inc.
1453 M St
Penrose Colorado 81240



Sent by Jeremy's iPhone. Sorry for typos and shorthand.

_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here:http://re-wrenches.org

List Address:RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

Reply via email to