Hello Wrenches,
A pair of Schneider XW Pro inverters will not share the load. We had
used a configuration tool, with the help of Jose at tech support, and
temporarily got the pair to balance. We adjusted the output voltages so
that the inverters would share the load.
Later the inverters started drifting. At present, one will take all the
load until it reaches a point around its maximum production limit. Then
that inverter will stop production and the other will take over.
Is there a defective inverter? Any ideas at all about what might be
going on?
Thank you,
Drake
Drake Chamberlin
Athens Electric LLC
Ohio Electrical Contractor’s License 44810
CO Master Electrician’s License 4526
NABCEP Certified PV Installation Professional
--
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
