Has anyone had a vfx sort of not pay attention to it charging current settings,
I have a customer who’s older vfx will do the following Settings are 5 amps ac, 5 amp ac charge It’ll run at about 10 amps dc charging Then randomly go up to 30 amps dc then back down. Maybe 15 seconds Later go up to 25 amps and back down. Kinda all over the place Then will stay at the lower amps for some period of time. I’m thinking it’s a hardware problem? And given the age a new board set is probably in order. Thoughts? Thx Jay _______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org