Dave, thanks for the info. I did read the manual and saw the
reference to the IEE Region. Since the PW wasn't important enough
for Schneider to put in the installation manual, and the Model is
listed XW Pro 6848 NA (north america?) I figured we were in the
right Region and moved on. Any idea what the IEE Region code
affects?
I'm also looking for answers to connecting to the modbus registers
and being able to pull data from all the devices on the network. I
will ping Schneider Tech support again. Any info I get I will share
with the list.
I have to say that since these XW pros have been installed a week
ago they've performed flawlessly. Hoping for many years of good
performance for this very patient customer!
All the best,
Greg Egan
Remote Power Inc.
Fairbanks, AK
Dave
Angelini Offgrid Solar via RE-wrenches
Sun, 11 Jun 2023 15:31:28 -0700
It is pretty well laid out on the website for 3 + years that you
need to use Insight.
You should also read the installer info.
https://solar.se.com/us/en/2021/06/29/essential-advanced-resources-for-installers/
SCP will work for some basic functions but is out of memory for
XWP. Use for indication only.
I am guessing that you did not program XWP to set the IEE region
code as above in the installers manual? This is probably
causing some extra issues for you.
You do need the password and I can send it if you do not have it?
Good Luck.
Dave Angelini Offgrid Solar
"we go where powerlines don't"
http://members.sti.net/offgridsolar/
e-mail offgridso...@sti.net
text 209 813 0060
