Hi Jay, Larry says is correct. My experience, with cells and there BMS is they need to get up to top balance voltage then the BMS will stop charging the full cells and bring the remainder of cells up to fill charge. My oldest set is about 6 years old, since I understood they have been fine
On Mon, Jun 26, 2023, 3:58 PM Jay via RE-wrenches < re-wrenches@lists.re-wrenches.org> wrote: > Hi All > > I’m wondering if minimum charge amps for lithium is common or not? > > Or does it have to do with the cell shape: cylindrical vs prismatic vs > pouch? > > A client purchased some EG4 batteries and they are getting a bit out of > balanced. Tech support didn’t suggest higher volts or longer absorb but did > mention they need 30-50 amps charge. It’s not in the manual. > > Wondering what you all think and know > > Thx > Jay > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
