Some of these BMSs are not very tolerant of heavy loads... the heavier load may have triggered the BMS to shut down and go into self-protect mode. It can take a few hours to days for voltage to recover. Isolate the battery from the parallel connections and give a few days of no load time to recover and reset.
After that, use a regulated power supply and connect it to the battery to charge. You only need a slight current, usually less than ten amps. Set the power supply up at the base voltage 54 to 56 volts. Last, supplying charge voltage on and off several times can wake up the BMS, but again, I would only try this with a regulated power supply. The bad news is they may have killed the BMS... once you do that, it's a hard sell for most manufacturers to cover under warranty. Good Luck... <http://www.rollsbattery.com> <http://www.rollsbattery.com> <http://www.rollsbattery.com> <http://www.rollsbattery.com> <http://www.rollsbattery.com> <http://www.rollsbattery.com> <http://www.rollsbattery.com> <http://www.rollsbattery.com> <http://www.rollsbattery.com> <http://www.rollsbattery.com> <http://www.rollsbattery.com> <http://www.rollsbattery.com> <http://www.rollsbattery.com> <http://www.rollsbattery.com> <http://www.rollsbattery.com> <http://www.rollsbattery.com> <http://www.rollsbattery.com> <http://www.rollsbattery.com> Steve Higgins ⋅ Technical Services Manager t +1.902.597.4020 m +1.206.790.5840 f +1.902.597.8447 e st...@surrette.com <http://www.facebook.com/RollsBattery> <https://www.youtube.com/user/RollsBattery> <https://www.youtube.com/RollsBatteryEngineering> <https://www.youtube.com/RollsBatteryEngineering> <https://www.youtube.com/RollsBatteryEngineering> <https://www.linkedin.com/company/rolls-battery-engineering> <https://www.linkedin.com/company/rolls-battery-engineering> <https://www.linkedin.com/company/rolls-battery-engineering> <http://www.instagram.com/RollsBattery> <http://www.instagram.com/RollsBattery> ------------------------------ CONFIDENTIALITY: The information transmitted herein is intended only for the addressee and may contain confidential, proprietary and/or privileged material. Any unauthorized review, distribution or other use of or the taking of any action in reliance upon this information is prohibited. If you receive this email in error, please contact the sender and delete or destroy this message and all copies. ------------------------------ On Wed, Oct 11, 2023 at 6:42 PM Lou Russo via RE-wrenches < re-wrenches@lists.re-wrenches.org> wrote: > I would call Current Connected in Nevada. > > They handle SOKs for the US market and I have found there tech support to > be knowledgeable and timely. > > > > On Wed, Oct 11, 2023, 2:06 PM Jay via RE-wrenches < > re-wrenches@lists.re-wrenches.org> wrote: > >> Buy another SOK battery so that doesn’t happen. >> >> Or maybe happens less >> >> Jay >> >> >> >> On Oct 11, 2023, at 5:55 PM, Kristopher Schmid via RE-wrenches < >> re-wrenches@lists.re-wrenches.org> wrote: >> >> >> Hello brain trust, >> >> Anyone have experience with SOK lithiums? Here's my issue. Client has a >> tiny home and bought their system online (I know, run away...). Whenever >> they start a larger load (power tool, hair dryer) it pulls too much current >> and causes the BMS to shut down the battery output. Not necessarily a huge >> issue, but I cannot get the app (ABC-BMS) to reset the batteries. I log in >> with the password and it gives me the reset option, but it will not allow >> me to click OK. Hooking up an external battery charger has been my only >> successful reset solution. >> >> Any help would be greatly appreciated. >> >> Thanks, >> Kris >> >> Shine On! >> >> Kris Schmid >> Legacy Solar, LLC >> 137 West 1st Avenue >> Luck, WI 54853 >> www.legacysolar.com >> 715-653-4295 >> NABCEP Certified PV Installation Professional >> Licensed Wisconsin Master Electrician >> BSEE >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> Pay optional member dues here: http://re-wrenches.org >> >> List Address: RE-wrenches@lists.re-wrenches.org >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> There are two list archives for searching. When one doesn't work, try the >> other: >> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> >> List rules & etiquette: >> http://www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> http://www.members.re-wrenches.org >> >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> Pay optional member dues here: http://re-wrenches.org >> >> List Address: RE-wrenches@lists.re-wrenches.org >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> There are two list archives for searching. When one doesn't work, try the >> other: >> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> >> List rules & etiquette: >> http://www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> http://www.members.re-wrenches.org >> >> _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org