I’m not familiar with Outback defaults but most inverters I’ve dealt with have a grid tolerance of 10% +/- so 216 to 264VAC.
On Mon, Oct 30, 2023 at 6:57 AM Drake Chamberlin via RE-wrenches < re-wrenches@lists.re-wrenches.org> wrote: > Hi Jay, > > The inverter won't even connect to the grid. It stays in the state where > it is sampling the grid, AC in light blinking. > > Is the default high voltage for the nominal 240 V 280? (IE 140 V X 2). > > > Thanks for your help. > > > Drake > > > *Drake Chamberlin* > > *Athens Electric LLC* > > *Ohio Electrical Contractor’s License 44810* > > *NABCEP Certified PV Installation Professional* > --- > > > > On 2023-10-29 15:45, Jay via RE-wrenches wrote: > > > Hi drake > > The early mate 3 has a glitch which I think they changed in the 3s. > > You e got to set the rebulk volts above what you want it to charge at. > > IE if the battery volts don't get below the rebulk volts it won't charge. > > So if your shallow cycling the batteries it's common it won't get below > the rebulk volts. If you're deep cycling it usually will with default > settings > > The default high voltage window for ac input is default at 140v. > > Hope this helps > > Jay > > > > > > On Oct 29, 2023, at 11:14 AM, Drake Chamberlin via RE-wrenches < > re-wrenches@lists.re-wrenches.org> wrote: > > My Radian GS 8048 intermittently will connect to the grid to charge > batteries. The grid voltage seems to run high around here. Yesterday, it > wouldn't connect. The grid voltage was at 251 V. Later it did connect. At > that point the grid was at 246 V. > > I am suspecting that the Radian has a voltage acceptance limit of 250 V. > Is that true? Is it possible to open up the window? > > If that isn't it, what could be the problem? > > Thank you, > > Drake > > > *Drake Chamberlin* > > *Athens Electric LLC* > > *Ohio Electrical Contractor's License 44810* > > *NABCEP Certified PV Installation Professional* > > > > -- > > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > > > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org